OUR COMMITMENT IS TO ASSOCIATE AND WORK TOGETHER FOR THE SAFETY, PROSPERITY AND WELL BEING OF MANKIND

SEND US INQUIRY

Flame arrester protect storage, distribution and chemical process facilities containing flammable gases and liquids from fire and explosions. It is an effective device which isolates source of ignition and allows vapor to flow freely in venting and colletion system.

The most effective method of quenching flame is to install Pre'con flame arrester either at the strategic point along with pipe work system or at end of the pipe line where gas / vapor are being vented into atmosphere.

Flame Arrester are designed to give maximum air flow consistent with operating effeciency, fire protection and low maintenance cost. Flame arrester operates on the principal; removing of heat from the flame, as it attempts to travel through narrow passage with wall of metal or other heat conductive materials for instance PRE'CON Flame arrester employ layers of metal ribbons with crimped corrugations as shown below :

Protected object under copyright Act

CRIMPED WOUND METAL RIBBON ELEMENT

The above construction produces a matrix of uniform opening which are carefully constructed to quench flame by absorbing the heat of the flame. This provides an extinguishing barrier to the ignited vapor mixture.

We Serve Worldwide

TYPES OF FLAME ARRESTER

End of Line Free Vent
PRE'CON Free Vent is combination which allows free venting and protect from fire hazards. They prevent flame transmission by absorbing and dissipating heat by use of crimped ribbon flame element. It is suitable only for verticle mounting and for end of line installation.

Protected object under copyright Act

APPLICATIONS

STORAGE TANK VENTS
OFFSHORE DRILLING PLATFORM VENTS
OIL/PETROCHEMICAL REFINERIES
FLARE STACKS
PULP AND PAPER NCG PROCESSING
VAPOR INCINERATION SYSTEMS
CHEMICAL PROCESSING PLANTS
MARINE LOADING SYSTEMS
NATURAL GAS SUPPLY LINES
VAPOR RECOVERY SYSTEMS
LANDFILL GAS INCINERATION
SEWAGE TREATMENT VAPOR
PROCESSING
PHARMACEUTICAL

End of Line Bi Directional [MODEL NO. PFCI / FA / 2050]
End of line bi-directional Flame Arresters are designed for unconfined deflagration and also for atmospheric explosion. They can be simply mounted on tank nozzles. It is suitable for vertical mounting and provision to mount Breather Valve on outlet connection.

In Line Bi Directional
[Model No: PFCI/FA/2050 (SERIES : IL)]
In line Bi-Directional Flame Arresters are designed to prevent the propagation of confined low, medium and high pressure deflagration. Pre'con design provides multi layers of flame elements. It is suitable for Horizontal, Vertical mounting along with pipe work.

Deflagration type in Line Bi Directional
PRE'CON high pressure deflagration arrester are designed to protect against high velocity and pressure flame front. The arresters are Bi Directional and can stop Low, Medium and High pressure Deflagration. PRE'CON design provides multiple layers of flame element which offers maximum flow to pressure